Compel Textiles
Fabric













































































Vinyl







































Download Textile Cards Below
Flexi Fabric Card
Mayer Vinyl Card
Mayer Fedora Card
Momentum Fabric Card
Quattro Fabric Card
Healthcare Fabric Card
D+C Screen Materials
Due to monitor calibration differences, the colors depicted on the screen may not be an exact representation of the true product color.
Manufacturer: | IDEAL Fabrics |
Grade: | 1 |
Content: | 100% Polyester |
Width: | 63″+/2%, or an option of 55″+/2% |
Weight: | .68 lb. per square yard / 1.09lb. per linear yard |
Repeat: | None |
Abrasion: | 150,000 Cycles Martindale |
Backing: | N/A |
Finish: | N/A |
Flammability: | BS EN 10211: 1994 (Cigarette); BS EN 10212: 1994 (Match); BS 7176:1995 Low Hazard; BS 476:Part 7: Class 1; California TB 117 Section E |
Maintenance: | IDEAL recommends professional dry cleaning |
Fabric Care & Cleaning
- Protect from direct sunlight
- Vacuum regularly using low suction
- Wipe with a damp cloth using upholstery shampoo
- Don’t scrub or use stiff brush
- Don’t wash with dish washing or laundry detergent
- Dry in the shade, away from direct heat
- Allow to dry thoroughly before using
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Momentum Textiles |
Grade: | 2 |
Content: | 58% Post Consumer Recycled Polyester; 42% Polyester |
Width: | 54″ |
Weight: | 15 oz 0.96 lb. |
Repeat: | None |
Abrasion: | 51,000 D.R. |
Backing: | Acrylic |
Finish: | Soil & Stain resistant |
Flammability: | CA Bulletin 117 2013; UFAC Class 1; NFPA 260 Class 1 |
Maintenance: | WS WaterBased Cleaning Agents or Foam. |
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Momentum Textiles |
Grade: | 2 |
Content: | 100% Post Consumer Recycled Polyester |
Width: | 54″ |
Weight: | 0.70 lb. |
Repeat: | 1-5/8″ L, 3″ W |
Abrasion: | 50,000 D.R. |
Backing: | Acrylic |
Finish: | Soil & Stain resistant |
Flammability: | CA Bulletin 117 2013; UFAC Class 1; NFPA 260 Class 1 |
Maintenance: | WS WaterBased Cleaning Agents or Foam. |
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Momentum Textiles |
Grade: | 2 |
Content: | 100% Post Consumer Recycled Polyester |
Width: | 54″ |
Weight: | 0.75 lb. |
Repeat: | 1/4″ L, 1/2″ W |
Abrasion: | 192,000 D.R. |
Backing: | Acrylic |
Finish: | Soil & Stain resistant |
Flammability: | CA Bulletin 117 2013; UFAC Class 1; NFPA 260 Class 1 |
Maintenance: | WS WaterBased Cleaning Agents or Foam. |
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Momentum Textiles |
Grade: | 2 |
Content: | 100% Post Consumer Recycled Polyester |
Width: | 58″ |
Weight: | 0.95 lb. |
Repeat: | None |
Abrasion: | 282,000 D.R. |
Backing: | Acrylic |
Finish: | Soil & Stain resistant |
Flammability: | CA Bulletin 117 2013; UFAC Class 1; NFPA 260 Class 1 |
Maintenance: | WS WaterBased Cleaning Agents or Foam. |
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Momentum Textiles |
Grade: | 2 |
Content: | 65% Post Industrial Recycled Polyester; 35% Post Consumer Recycled Polyester |
Width: | 54″ |
Weight: | 0.78 lb. |
Repeat: | None |
Abrasion: | 100,000 D.R. |
Backing: | Latex |
Finish: | Soil & Stain resistant |
Flammability: | CA Bulletin 117 2013; UFAC Class 1; NFPA 260 Class 1 |
Maintenance: | WS WaterBased Cleaning Agents or Foam. |
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Momentum Textiles |
Grade: | 2 |
Content: | 50% Post Consumer Recycled Polyester; 50% Polyester |
Width: | 54″ |
Weight: | 0.76 lb. |
Repeat: | 1/4″ L, 1/4″ W |
Abrasion: | 102,000 D.R. |
Backing: | Acrylic |
Finish: | Soil & Stain resistant |
Flammability: | CA Bulletin 117 2013; UFAC Class 1; NFPA 260 Class 1 |
Maintenance: | WS WaterBased Cleaning Agents or Foam. |
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Mayer Fabrics |
Grade: | 2 |
Content: | 100% Polyester |
Width: | 54″ |
Weight: | 13.4 oz./linear yard |
Repeat: | None |
Abrasion: | 237,000 D.R. (Wyzenbeek) |
Backing: | Acrylic |
Finish: | Stain Repellent |
Flammability: | Cal 117 Section E; NFPA 260/UFAC Class 1; ASTM E84 Class 1 or A (Unadhered); IMO A.652(16) 8.2. May comply with Cal. Tech. Bul. 133 when combined with appropriate components |
Maintenance: | S: Solvent Cleaner |
Fabric Care & Cleaning
S: Solvent Cleaner
Spot clean, using a mild water-free solvent or dry cleaning product. Clean only in a well-ventilated room and avoid any product containing carbon tetrachloride or other toxic materials. Pretest a small area before proceeding. Always rinse promptly with clean water.
Manufacturer: | Fujian Polytech Group Co., LTD |
Grade: | 1 |
Content: | PU coated on the surface |
Width: | 54″ |
Weight: | 700g ±50/m2 |
Repeat: | Normal temperature 10000 Cycles |
Abrasion: | In excess of 5000 Cycles |
Backing: | Polyester Fabric |
Finish: | Light fastness: 4 |
Flammability: | CA117 standard |
Maintenance: | Wet cloth scrub |
Vinyl Care & Cleaning
Spot clean with an upholstery shampoo, or the foam from a mild detergent. Pretest a small area before proceeding. Always rinse promptly with clean water.
Manufacturer: | Momentum Textiles |
Grade: | 2 |
Content: | 50% Post Consumer Recycled Polyester; 50% Polyester |
Width: | 54″ |
Weight: | 0.85 lb. |
Repeat: | 6-1/4″ L, 7-1/8″ W |
Abrasion: | 115,000 D.R. |
Backing: | Acrylic |
Finish: | Soil & Stain resistant |
Flammability: | CA Bulletin 117 2013; UFAC Class 1; NFPA 260 Class 1 |
Maintenance: | WS WaterBased Cleaning Agents or Foam. |
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Momentum Textiles |
Grade: | 2 |
Content: | 55% Post Consumer Recycled Polyester; 45% Polyester |
Width: | 54″ |
Weight: | 0.68 lb. |
Repeat: | None |
Abrasion: | 70,000 D.R. |
Backing: | Acrylic |
Finish: | Soil & Stain resistant |
Flammability: | CA Bulletin 117 2013; UFAC Class 1; NFPA 260 Class 1 |
Maintenance: | WS WaterBased Cleaning Agents or Foam. |
Fabric Care & Cleaning
A professional cleaning service is recommended
Treat Stains Quickly
- It will become increasingly difficult to remove the longer a stain is allowed to set
- Pretest any cleaning method or agent in a small hidden inconspicuous area
- Several less concentrated applications are less damaging than one concentrated application
Do not Let Fluids Penetrate the Surface
- Remove fluids immediately by blotting with a clean, colorfast, absorbent cloth
Remove Solid or Semi-solid Substances
- Using a flat object, remove as much of the stain as possible
- After removal, vacuum thoroughly using the proper attachments before cleaning with an agent
Water-based Stains
- Using a soft brush or sponge, apply warm, soapy water to the stain
Oil-based Stains
- Use solvent or dry clean solution. Don’t apply cleaning agent directly. Apply cleaning agent to cloth or sponge.
For all Stains
- Use light, quick strokes and start from the outside of the stain and work towards the center
- Do not rub or scrub as this may damage the fabric
- Do not use heat. Heat will set the stain.
- Do not over wet as this may leave a ring
- Soak up any remaining cleaning solution
- Use a clean cloth and cool water to remove any residue
- Allow fabric to dry thoroughly
- Vacuum well using appropriate upholstery attachment
Manufacturer: | Mayer Fabrics |
Grade: | 2 |
Content: | 86% Vinyl face, 14% Polyester backing – Phthalate (21P) Free |
Width: | 54″ |
Weight: | 28 oz./linear yard |
Repeat: | None |
Abrasion: | 250,000 D.R. (Wyzenbeek) |
Backing: | 100% Brushed Polyester Knit |
Finish: | ResilienceSR |
Flammability: | Cal 117-2013; NFPA 260/UFAC Class 1; BIFMA; FMVSS 302; IMO FTP 2010 Code MSC.307(88), Part 8, 3.1 & 3.2; May comply with Cal. Tech. Bul. 133 when combined with appropriate components. |
Maintenance: | WS: Water/Solvent Cleaner or BC: Bleach Cleanable |
Vinyl Care & Cleaning
WS: Water/Solvent Cleaner
Spot clean with a mild solvent, an upholstery shampoo, or the foam from a mild detergent. When using a solvent or dry cleaning product, follow instructions carefully and clean only in a well-ventilated room. Avoid any product that contains carbon tetrachloride or other toxic materials. With either method, pretest a small area before proceeding. Always rinse promptly with clean water.
BC: Bleach Cleanable
1 part bleach, 9 parts water = 10% bleach, 90% water solution. Do not clean/disinfect fabric for longer than 10 minutes using the 10% bleach solution. Always rinse promptly with clean water after applying the bleach solution. Failure to do so will void any and all warranties.
Manufacturer: | Mayer Fabrics |
Grade: | 2 |
Content: | 86% Vinyl face, 14% Polyester backing – Phthalate (21P) Free |
Width: | 54″ |
Weight: | 28 oz./linear yard |
Repeat: | None |
Abrasion: | 651,000 D.R. (Wyzenbeek) |
Backing: | 100% Brushed Polyester Knit |
Finish: | ResilienceSR |
Flammability: | Cal 117-2013; NFPA 260/UFAC Class 1; BIFMA; FMVSS 302 & 8.3; IMO FTP 2010 Code MSC.307(88), Part 8, 3.1 & 3.2; May comply with Cal. Tech. Bul. 133 when combined with appropriate components. |
Maintenance: | WS: Water/Solvent Cleaner or BC: Bleach Cleanable |
Vinyl Care & Cleaning
WS: Water/Solvent Cleaner
Spot clean with a mild solvent, an upholstery shampoo, or the foam from a mild detergent. When using a solvent or dry cleaning product, follow instructions carefully and clean only in a well-ventilated room. Avoid any product that contains carbon tetrachloride or other toxic materials. With either method, pretest a small area before proceeding. Always rinse promptly with clean water.
BC: Bleach Cleanable
1 part bleach, 9 parts water = 10% bleach, 90% water solution. Do not clean/disinfect fabric for longer than 10 minutes using the 10% bleach solution. Always rinse promptly with clean water after applying the bleach solution. Failure to do so will void any and all warranties.